Kia Optima DL3: Chassis / Suspension Ball Joints
Repair procedures
| Inspection |
| 1. |
Visually check to be sure that there are no flaws and cracks that may cause injury. |
Repair procedures Inspection Steering Wheel Play Inspection 1. Turn the steering wheel so that the front wheels are facing straight ahead.
Repair procedures Inspection Visually check the loose mount bolt.
Other information:
Kia Optima DL3 2019-2026 Service and Repair Manual: Rear Glass Defogger Switch
Repair procedures Inspection 1. In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (KDS). The diagnostic system (KDS) provides the following information. (1) Self diagnosis : Checking failure and code number (DTC).
Kia Optima DL3 2019-2026 Service and Repair Manual: Blower Resistor
Repair procedures Inspection 1. Measure the resistance between the terminals. 2. measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) (1) Pin No 1.
Categories
- Manuals Home
- Kia Optima Owners Manual
- Kia Optima Service Manual
- Air bag collision sensors
- Emergency trunk safety release
- Heating, Ventilation and Air Conditioning
- New on site
- Most important about car
