Kia Optima: Light bulbs / License plate lamp bulb replacement
1. Open the trunk lid.
2. Loosen the retaining screw of the trunk lid cover and then remove the cover.
3. Remove the socket from the assembly by turning the socket counterclockwise
until the tabs on the socket align with the slots on the assembly.
4. Remove the bulb from bulb-socket by pulling it out.
5. Insert a new bulb into the bulbsocket.
6. Install the socket in the assembly by aligning the tabs on the socket with
the slots in the assembly. Push the socket into the assembly and turn the socket
clockwise.
7. Install the trunk lid cover.
1. Open the trunk lid.
2. Loosen the retaining screw of the trunk lid cover and then remove the cover.
3. Remove the nuts from the vehicle.
4. Disconnect the rear combination lamp (inside) ...
High mounted stop lamp (LED type) bulb replacement
If the high mounted stop lamp (LED) does not operate, have the vehicle checked
by an authorized Kia dealer.
The LED lamp cannot be replaced as ...
Other information:
Repair procedures
Inspection
1.
Remove the air cleaner element.
2.
Check if the air filter is excessively dirty. If so, replace the air
cleaner element.
3.
If the air cleaner element needs to be cleaned, blow compre ...
1. Detach the speed restriction label (1) from the sealant bottle (2), and place
it in a highly visible place inside the vehicle such as on the steering wheel to
remind the driver not to drive too fast.
2. Filling the sealant Strictly follow the specified sequence, otherwise the
sealant may e ...