| Replacement |
| 1. |
If the E-Call switch needs to be replaced, replace the overhead console lamp assembly. (Refer to Lighting System - "Overhead Console Lamp") |
Schematic diagrams Connector and Terminal Function [Russia] [Europe] Repair procedures Removal E-call Unit 1.
Repair procedures Removal When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. 1.
Components and components location Components Location 1. Mode control actuator Description and operation Description The mode control actuator is located at the heater unit. It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C co